Citation: | HU Ya-jing, WANG Gang, LUO Ying, LI Ya-fang, YI Cheng. An Investigation Into the Effect of Process Parameters of Sedi Herba<\i> Extract Granulation in Fluid Bed on Granule Size Distribution by Response Surface Model and Partial Least Squares Model[J]. Journal of Nanjing University of traditional Chinese Medicine, 2018, 34(5): 480-484. |
[1] |
刘怡,冯怡.流化床制粒影响因素的探讨[J].中国医药工业杂志,2004, 35(9):566-568.
|
[2] |
陶德林.复方骨碎补接骨片一步制粒工艺条件优选[J].中草药,2012, 43(2):293-295.
|
[3] |
岳国超,陈丽华,刘红宁,等.多指标综合评分法考察健胃消食片的流化制粒工艺[J].中草药,2014, 45(7):949-954.
|
[4] |
魏莉,姜文雅,陈挺.不同辅料在丹参提取液前处理过程中的比较研究[J].时珍国医国药,2011, 22(4):945-946.
|
[5] |
HUSSAIN M, KUMAR J, PEGLOW M, et al. On two-compartment population balance modeling of spray fluidized bed agglomeration[J]. Comput Chem Eng, 2014, 61(61): 185-202.
|
[6] |
FRIES L, ANTONYUK S, HEINRICH SA, et al. Product design based on discrete particle modeling of a fluidized bed granulator[J]. Particuology, 2014, 12(SI): 13-24.
|
[7] |
闫精杨,江曙,刘培,等.银杏叶药渣中聚戊烯醇和总黄酮的综合提取工艺研究[J].南京中医药大学学报,2017, 33(1):104-108.
|
[8] |
薛瑞,沈晓华,杨洁,等.透明质酸修饰的葛根素 PEG-PLGA 纳米粒的处方工艺优化及其体外评价[J].南京中医药大学学报,2016, 32(5):487-490.
|
[9] |
伏东宁,李祥永,常志惠,等.Box-Behnken 效应面法优化黄芩素纳米胶束制备工艺研究[J].南京中医药大学学报,2016, 32(5):491-494.
|
[10] |
肖璐,陈志鹏,肖衍宇,等.中心复合设计优化甘草次酸修饰马钱子碱脂质体[J].南京中医药大学学报,2011, 27(5):451-454.
|
[11] |
LIAO Z, ZHANG N, ZHAO G, et al. Multivariate analysis approach for correlations between material properties and tablet tensile strength of microcrystalline cellulose[J]. Pharmazie, 2012, 67(9): 774-780.
|
[12] |
汪晶,吴晓燕,狄留庆.星点设计-效应面法优选凉血通瘀颗粒醇提工艺[J].南京中医药大学学报,2012, 28(2):169-172.
|
[13] |
杨菁,潘金火,梅馨.星点设计-效应面优化法优选连钱草中总黄酮超声提取工艺[J].南京中医药大学学报,2012, 28(3):269-271.
|
[14] |
SHIRAZIAN S, KUHS M, DARWISH S, et al. Artificial neural network modelling of continuous wet granulation using a twin-screw extruder[J]. Int J Pharm, 2017, 521(1/2): 102-109.
|
[15] |
LIU H, WANG K, SCHLINDWEIN W, et al. Using the Box-Behnken experimental design to optimise operating parameters in pulsed spray fluidised bed granulation[J]. Int J Pharm, 2013, 448(2): 329-338.
|
[16] |
LANDIN M. Artificial intelligence tools for scaling up of high shear wet granulation process[J]. J Pharm Sci, 2017, 106(1): 273-277.
|
[17] |
MIWA A, YAJIMA T, IKUTA H, et al. Prediction of suitable amounts of water in fluidized bed granulation of pharmaceutical formulations using corresponding values of components[J]. Int J Pharm, 2008, 352(1/2): 202-208.
|
[18] |
MORIN G, BRIENS L. A comparison of granules produced by high-shear and fluidized-bed granulation methods[J]. AAPS Pharm Sci Tech, 2014, 15(4): 1039-1048.
|
[19] |
HUANG J, KAUL G, CAI C, et al. Quality by design case study: an integrated multivariate approach to drug product and process development[J]. Int J Pharm, 2009, 382(1/2): 23-32.
|
[20] |
GODHE A, MCQUOID MR. Influence of benthic and pelagic environmental factors on the distribution of dinoflagellate cysts in surface sediments along the Swedish West coast[J]. Aquat Microb Ecol, 2003, 32(2): 185-201.
|
[21] |
管峥,毕姗姗,杨璐,等.响应曲面模型在麻醉药合用中药物-药物相互作用研究的进展[J].药学学报,2008, 43(12):1171-1178.
|
[22] |
FRIES L, ANTONYUK S, HEINRICH S, et al. DEM-CFD modeling of a fluidized bed spray granulator[J]. Chem Eng Sci, 2011, 66(11): 2340-2355.
|
[23] |
刘国平,赵立杰,冯怡,等.中药制剂原料吸湿动力学初步探讨[J].中国实验方剂学杂志,2014, 20(6):15-19.
|
[24] |
曾荣贵,蒋且英,廖正根,等.表面包覆改性技术改善中药浸膏粉体流动性及吸湿性研究[J].中国中药杂志,2016, 41(12):2245-2249.
|
[25] |
王雅洁,汤成成,贾艾玲,等.黄芪水提取物吸湿模型的拟合[J].中成药,2017, 39(1):65-70.
|
[26] |
丁志平,乔延江.不同粒径黄连粉体的吸湿性实验研究[J].中国实验方剂学杂志,2004, 10(3):5-7.
|
[27] |
张定堃,张芳,林俊芝,等.乳糖研磨改性降低红景天提取物吸湿性的工艺与原理研究[J].中国中药杂志,2014, 39(8):1413-1420.
|
[28] |
CREAN B, CHEN X, BANKS SR, et al. An investigation into the rheology of pharmaceutical inter-granular material bridges at high shear rates[J]. Pharm Res, 2009, 26(5): 1101-1111.
|
[29] |
廖正根,李哲,明良山,等.影响高速搅拌湿法制粒产物的穿心莲混合粉体关键物理特性参数研究[J].中国中药杂志,2014, 39(19):3741-3747.
|
[30] |
BADAWY SI, NARANG AS, LAMARCHE K, et al. Mechanistic basis for the effects of process parameters on quality attributes in high shear wet granulation[J]. Int J Pharm, 2012, 439(1/2): 324-333.
|
[31] |
IVESON SM, LITSTER JD, HAPGOOD K, et al. Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review[J]. Powd Technol, 2001, 117(1/2S): 3-39.
|